ASQ-125F3 Isolating Switch

ASQ-125F4 Isolating Switch

Product Description
ASQ-125 Series Load Isolating Switch (hereinafter referred to as the switch) is developed with introduced European advanced technology by our company.
With international advanced level, it is an ideally upgraded product among similar products in domestic market.
The switch is widely used in construction, power, petrochemical, distribution and automation systems of other industries.
With modular designed structure, flexible and varied comparability, glass fiber reinforced unsaturated engineering plastic manufactured outer case, the switch
has a high dielectric property, protection ability and reliable operation safety.
Operating mechanism is the spring energy storage, instantaneous release of the acceleration mechanism, instantaneous on and break the double break point
contact structure. With a variety of structure and operation mode, the switch has nothing to do with the speed of operating handle. The switch has a window for
direct observation of the broken state of contact. It can be operated from inside, outside and behind the cabinet, or from front and side. The switch has a back
panel connection.
The switch has the advantages of beautiful appearance, novel, simple, small size and complete function. It is an ideal choice for the similar products.

Main technical Parameter

Switch model			A	ASQ40F	ASQ63F	ASQ80F	ASQ100F	ASQ125F
Rated insulation voltage and rated working voltage Dielectric strength Rated impulse withstand voltage	AC-20/DC-20	50 Hz 1min.	V	750	750	750	750	750
			kV	6	6	6	6	6
			Kv	8	8	8	8	8
Rated heating current and rated operating current Minimum cross-sectional area of conductor	AC-20/DC-20	40℃）³⁾	A	40	63	80	115	125
		40℃）³⁾	A	40	63	80	115	125
		60℃）³⁾	A	32	50	63	80	100
		Cu	mm²	10	16	25	35	50
Rated operting current	AC-21A	415V	A	40	63	80	100	125
	AC-21A	440～690V	A	40	63	80	100	125
	AC-22A	415V	A	40	63	80	100	125
		440～500V	A	40	63	80	100	125
		690V	A	40	63	80	100	125
	AC-23A	415V	A	23	63	75	80	90
		440V	A	23	63	65	65	78
		500V	A	23	45	58	60	70
		690V	A	12	20	20	40	50
Rated operting current/Inter electrode series	DC-21A	24～48V¹⁾	A	32/1	63/1	80/1	100/1	125/1
		110V	A	32/2	63/2	80/2	100/2	125/2
		220V	A	32/3	63/4	80/4	100/4	125/4
		440V	A	16/4	16/4	16/4
		500V	A	16/4	16/4	16/4
		750V	A	32/8
	DC-22A	24～48V¹⁾	A	32/1	63/1	80/1	100/1	125/1
		110V	A	32/2	63/2	80/2	100/2	125/2
		220V	A	32/4	45/4	45/4	63/4	80/4
		440V	A	10/4	10/4	10/4
		750V	A	25/8
	DC-23A	24～48V¹⁾	A	32/1	63/1	80/1	100/1	125/1
		110V	A	32/2	63/2	80/2	100/2	125/2
		220V	A	32/4	45/4	45/4	63/4	63/4
		440V	A	10/4	10/4	10/4
		750V	A	16/8
Rated power (These values are for reference only, and may vary from different motor manufacture)	AC-23A	220～240V	kW	5.5	11	22	22	22
		400～415V	kW	11	22	37	37	45
		440V	kW	11	22	37	37	45
		500V	kW	11	22	37	37	45
		690V	kW	11	15	18.5	37	45
Rated breaking capacity	AC-23A	至415V	A	184	360	640	640	720
		440V	A	184	360	448	520	624
		500V	A	184	360	464	480	560
		690V	A	96	160	160	320	400
Rated breaking capacity/Inter electrode series	DC-23A	24～48V	A	128/1	180/1	252/1	400/1	500/1
		110V	A	128/2	180/2	252/2	400/2	500/2
		220V	A	128/4	180/4	180/4	252/4	252/4
		440V	A	40/4	40/4	40/4
		750V	A	64/8
Rated short circuit current Ip(R.M.S.) And the curresponding maximum cut off current ic Refer cut offcurrent to the numberical value offered by fuse manufacturer Single phase test based on IEC 60269	Ip (R.M.S.)	50kA	kA				16.5	16.5
		≤415V	A				125/125	125/125
		100kA	kA
		≤500V	A
		10kA	kA				8.2	8.2
		≤690V	A				125/10	125/10
		50kA	kA				10	10
		≤690V	A				63/63	63/63
Rated ICW	（R.M.S.) Icw	690V, 0.25s	kA
Rated ICW	（R.M.S.) Icw	690V, 1s	kA				2.5	2.5
Rated short circuit switching capacity	Icm	690V/500V	kA				3.6	3.6
Rated capacitor capacity (rated value of the capacitor subject to fuse limit)		400～415V	kVAr				40	50


Function loss/pole			W				4	6.3
Mechanical life			Oper				20000	20000
Weight(without attachment)	3P		kg				0.36	0.36
Weight(without attachment)	4P		kg				0.5	0.5
Cable specifications			mm²				10-70	10-70
Cable specifications			AWG				8-100	8-100
Terminal tightening torque Operating torque			Nm				6	6
Terminal tightening torque Operating torque	3P		Nm				2	2

1) Below 48V, OT80 is recommended to be used in parallel, especially in a polluted environment.

2) 200A, the minimum cable specifiction 95mm², use OZXT2 or bus connections.

3) IEC 60947-1，§ 6.1.1 standard

Overall and Mounting Dimensions

…

Fill out my online form.

<a href="https://anxele.wufoo.com/forms/zrfgs5l0zeg5tx/def/entsource=wordpress" rel="nofollow">Fill out my Wufoo form!</a>

ASQ-125F3 Isolating Switch

PRODUCTS

CONTACT US