AICT-4P-25A Manual control contactor

AICT-4P-25A Manual control contactor

AICT-4P-25A Manual Control Contactor

Brief Introduction:

• AICT Series Lighting control device AC Contactor (contactor for short) is mainly designed for AC 50/60HZ circuits with 230/450V rated operating voltage in AC-7A usage, rated operating voltage up to 230V,rated operating current up to 63A

• It functions as long distance breaking and circuit controlling.

• This product is mainly applied to household appliances or low inductance loading and home electromotor loading control used for the similar purpose

 

 

 

 

Specification

Type Designation

Connecting Type

Qnt/Ctn

MU No

G/N W/N

MEAS

Pcs

Kg

(cm)s

Aict-2516-25AMP

Three Phase, 3NC

60

2

14.5/14

47*26*18

Three Phase, 3NC

60

2

14.5/14

47*26*18

Three Phase, 2NO+1NC

60

2

14.5/14

47*26*18

Three Phase, 2NC+1NC

60

2

14.5/14

47*26*18

3 Phase + Four wire, 4NC

60

2

15/14.5

47*26*18

3 Phase + Four wire, 4NO

60

2

15/14.5

47*26*18

3 Phase + Four wire, 3NO+1NC

60

2

15/14.5

47*26*18

3 Phase + Four wire, 2NC+2NO

60

2

15/14.5

47*26*18

Normal working and installation Conditions:

• Ambient temperature:-5℃ to +40℃.The average temperature no more than +35℃ in 24 hours.

• Altitude: No more than 2000m.

• Atmospheric condition: the relative humidity of the installation place should be no more than 50% When the maximum temperature is +40℃,If under a lower temperature ,a higher relative humidity is allowed. The monthly average minimum temperature in the wettest month should not exceed +25℃ and the monthly average maximum relative humidity of this month no more than 90%.Beside, the dew on the surface of products caused by temperature change should be taken into consideration.

• Class of Pollution :Class 2.

• Installation Condition: Class 2

• Installation Mode: Use the installation orbit of “Top Cap” section TH35-7.5 mould

• Mechanical Life:≥1*105times

• Electrical Life:≥3*104times

Specialty:

(Table 1: Types of contactor and relevant data)

TypeRated insulation voltage(V)Rated operating voltage(V)Rated heating current(A)Rated operating current(A)Control Power(KW)
AC1,ACTa,ACTb500230100100/4025/6.5
AC1,ACTa,ACTb5002308080/3220/5
AC1,ACTa,ACTb5002306363/2513/3.8
AC1,ACTa,ACTb5002304040/158.4/2.4
AC1,ACTa,ACTb5002303232/126.5/1.9
AC1,ACTa,ACTb5002302525/8.55.4/1.5
AC1,ACTa,ACTb5002302020/74/1.2
AC1,ACTa,ACTb5002301616/5.53.5/1.2

(Table 2: Switching on and segmenting ability)

TypeSwitching on and segmenting conditionPick-up time(s)Interval(s)Operation frequency
Ic/IeUr/UeCos
AC-1,AC-7a1.51.050.80.051050
AC-7b81.050.450.051050

(Table 3: Operating performance)

TypeOn conditionSegment conditionPick-up time(s)Interval(s)Operation frequency
l/leU/UeCosIc/IeUr/UeCos
AC-11.01050.81.01050.80.05106000
AC-7a1.01.050.81.01.050.80.051030000
AC-7b6.01.00.456.01.00.450.051030000

Connection Diagrams & Dimensions:

AICT-1P-25A Manual Control Contactor

Fill out my online form.