AC19-32 Changeover Capacitor Contactor

APPLICATION

AC19 series “anxele” brand Changeover capacitor contactor is especially used for low voltage shunt capacitor. And it

widely used in reactive power compensation equipment with AC 50/60HZ and voltage 380V, inrush

current system in the contactor can decrease shock to capacitor and lower switching overvoltagein

while breaking a circuit. Moreover, lt can replace transfer device which are composed of one contactor

and three current limiting reactors, its feature is small, light, joins convenient and reliable, hige

capacity of turning on/off.

This product conforms to GB14048.4、IEC60947-4-1 standard.

 

 

 

MODEL AND MEANING

NORMAL RUNNING AND INSTALLATION CONDITIONS

  • Ambient air temperature: -5℃~+40℃, the average value should not exceed+35℃ within 24 hours.
  • Elevation: at most 2000m.
  • Atmospheric conditions: When the temperature at 40℃, the relative humidity of atomsphere should

be at the most 50%. When at relatively low temperatures, it could have higher relative humidity. Monthly

maximum relative humidity could be not more than 90%. Special measures should be taken due to

occurrence of dews.

  • Class of pollution: Class 3
  • Installation category:Ⅲ
  • Installation conditions: Degree of inclination between fitting surface and vertical surface should not

exceed±5°

  • Impact shock:Product should be installed and used in the place where often shakes and impacts.

Fill out my online form.